Plastic scrap converted  to crude oil through pyrolysis plant

Waste plastics are common in our lives. Waste plastics can be divided into biodegradable waste plastics and non-degradable waste plastics. Traditionally, the way we dispose of waste plastics is to burn or landfill. Although this will reduce some waste plastics, Can cause air pollution or soil pollution. The DoingGroup's plastic scrap converted  to crude oil through pyrolysis plant uses pyrolysis chemical reactions to crack waste plastics into fuel, carbon black, and combustible gases. The re-contamination of the environment with waste plastics in the traditional sense is avoided.

What is the specific workflow for plastic scrap converted  to crude oil through pyrolysis plant?

1. The collected waste tires are sent to cracking equipment through an automatic pushing device. The reactor was heated.

2. When the reactor temperature reaches a certain level, a cracking reaction will occur and the waste plastic will be cracked into oil and gas.

3. The liquefied petroleum gas is liquefied by the condensing system into oil and gas. Uncondensed gas is filtered again through the condensing system.

4. Dust and deodorize the liquefied fuel to remove the residue after oil and gas cooling, as well as the smoke generated by the combustion of fuel.

5. After the reactor is cooled to below 40 degrees, remove the carbon black inside.

Knowing the workflow of plastic scrap converted  to crude oil through pyrolysis plant, what are the unique advantages of Dongying's cracking equipment compared with other suppliers?

1. Adopt Q245R standard boiler plate steel, thickness is 16mm, adopt arc pressure compression head, can withstand high temperature and high pressure.

2. Our waste plastic cracking equipment adopts a unique 3-step welding process, which can ensure a long service life.

3. The exterior of the heating system is designed with an external thermal insulation system to prevent heat loss and improve the operating efficiency of the equipment.

4. Considering the safety of the equipment, the equipment includes a water separator, a water seal, and a vacuum device. On the one hand, it can purify oil and gas off-gas, on the other hand it can prevent oil and gas, and the backflow of exhaust gas. And can provide negative pressure, drainage of oil and gas, increase oil yield.

5. The three-stage cooling system, which uses column tube condensation, also known as heat exchanger, is the most commonly used and most effective condenser in the oil industry. It can ensure that the cracked oil and gas is fully cooled and the oil yield is high.

Running our plastic scrap converted  to crude oil through pyrolysis plant can get fuel, carbon black, combustible gases, and these recycled materials have a wider range of uses in life. Specific uses are as follows:

Fuel oil usage

1. Fuel oil: Mainly used in steel plants, boiler heating, heavy oil generators, cement plants.

Carbon black usage

2. Carbon black: It is mainly used for pressure ball combustion and refined milling. Refined flour can be used for new tires, rubber soles, and pigments.

3. Combustible gas: It will be recycled by the equipment again.

Contact: Ms Bonnie

Phone: +86-371-5677 1821

Mobile/Wechat/Whatsapp:0086-135-2669-2320

Skype: bonniezhao2

Email: oilmachine@doinggroup.com

http://www.recyclingpyrolysisplant.com

http://www.doinggroup.com