English
Español
Русский
עברית
Français
Basic Info
- Model NO.: SG
- Certification: CE SGS ISO9001
- Specification: International
- Color: Yellow or Gray
- Trademark: YULONG
- Origin: Shangdong, China
Product Description
SG Organic Fertilizer Hammer Mill (CE)
Introduction:
1. The SG organic fertilizer hammer mills of 40, 50, 60, 65 types are special products. They are the most ideal grinding equipments of all kinds of stalk, weed, corn, soybean, PVC foaming board, rubber, and etc.
2. The SG organic fertilizer hammer mill: Structure reasonable, firm durable, safe reliable, easy operation, the vibration small, and the efficiency is high.
3. This SG Organic fertilizer hammer mill is widely used in the professions such as fodder factory, cultivation factory, organic fertilizer factory, Chinese medicine, chemical industry and so on.
Note: This parameter is got on the condition of well installation, air-inhaling and work normally.
The component of raw material is not bigger than 14%, the rate of opening holes is below 33%.
Technicasl parameter:
Introduction:
1. The SG organic fertilizer hammer mills of 40, 50, 60, 65 types are special products. They are the most ideal grinding equipments of all kinds of stalk, weed, corn, soybean, PVC foaming board, rubber, and etc.
2. The SG organic fertilizer hammer mill: Structure reasonable, firm durable, safe reliable, easy operation, the vibration small, and the efficiency is high.
3. This SG Organic fertilizer hammer mill is widely used in the professions such as fodder factory, cultivation factory, organic fertilizer factory, Chinese medicine, chemical industry and so on.
Note: This parameter is got on the condition of well installation, air-inhaling and work normally.
The component of raw material is not bigger than 14%, the rate of opening holes is below 33%.
Technicasl parameter:
| Model | SG40 | SG50 | SG60*27 | SG65*55 | SG65*75 |
| Diameter of rotor(mm) | 400 | 500 | 600 | 650 | 650 |
| Width of studio(mm) | 205 | 275 | 275 | 550 | 750 |
| Main axis rotate speed (r/min) | 3400 | 3100 | 2950 | 2950 | 2950 |
| spec of screener(mm) | 675× 200 | 750× 270 | 940× 270 | 540× 1020 | 740× 1020 |
| Linear Velocity of hammer(m/s) | 71 m/s | 81 m/s | 92 m/s | 100 m/s | 100 m/s |
| Spec of hammer(mm) | 120× 40× 4 | 180× 50× 5 | 180× 50× 5 | 180× 50× 5 | 180× 50× 5 |
| Hammer qty (pieces) | 4× 3=(12) | 4× 4=(16) | 6× 6=(36) | 6× 8=(48) | 6× 18=(108) |
| Related power (kW) | 7.5 | 15 | 22 | 30/37 | 45/55 |
| Model of bearings | 1307 | 1310 | 2315 | 2316 | 2316 |
| Wind absorbed quantity ( m/min ) | 5 | 11 | 18 | 22/25 | 33/38 |
| Weight (kg) | 90 | 180 | 280 | 1200 | 1500 |
| Raw material | Holes of screener(mm) | Capacity(T/h) | ||||
| SG- 40 | SG -50 | SG -60 | SG -65× 55 | SG -65× 75 | ||
| Stalk | φ 6 | 0.2-0.5 | 0.3-0.6 | 0.5-1 | 0.8-1.5 | 1-2 |
| Corn | φ 3 | 0.8 | 1.2 | 1.5 | 2-4 | 3-5 |
Product quality protection 
