Details of 6BHZF-3500 Peanut Sheller
1. High capacity 3500kg/h
2. Low loss, low crushing rate and small damage rate
3.3 - 4 operators can make production
Introduction of 6BHZF-3500 peanut sheller
The peanut sheller consists of two machines, one is the impurity removal device and the other is the peanut sheller. The impurity removal device is used for removing impurities like small mud balls, small stone & iron etc. From the raw material peanut, to make the peanuts cleaner; The peanut sheller is used for shelling to get the peanut kernel, with the design of peanut kernel division in outlet.
Request on how to shell peanut as follows
We need to shell the peanuts in sutiable humidity, usually peanuts were stored so dry that we have to do as following points:
1. If shelling in winter, watering 10kgs to the peanuts of 50kgs, and cover plastic file around 10hours, then could shell them after drying in the sun 1 hours. All is the same in other seasons expect covering the plastic film around 6 hours
2. Can be relatively dry peanuts (skin fruit) immersed in a large tank and with plastic film covering one day, then dry in the sun, at last start to shell when the peanut in sutiable humidity condition
3. For the voltage requirements and workplace options. Single-phase motor need to work properly and the voltage keep normally.
Any interest in our machine, please feel free to contact here. Reply will be made asap.
Dimension(L×W×H) | 2850×4200×2820 mm |
Weight | 1529 kg |
Power (3-phase) | Impurity Removal | 4-3kw ; 2-4kw |
Shelling | 6-7.5kw ; 2-7.5kw |
Capacity(peanut) | 3500 kg/h |
Crushing Rate | ≤4% |
Damage Rate | ≤3% |
Loss Rate | ≤0.7% |
Shelling rate | ≥98% |
Rate of Impurity in Kernel | ≤0.4% |
Power Consumption | ≤6.3 kw?h/t |
Noise Average Sound Pressure Level | ≤93 kw?h/t |