DC 24V High Pressure Electric Diaphragm Water Pump for Spraying/Boostin/Car Washing
Application:
Agriculture/Yacht / RV/Caravan pressurized water system
Sprayer fixture (Vehicle-mounted sprayer, electric sprayer)
Cleaning machine, Humidifier, Water purification, Medical apparatus
Any other pressurization system
How a Diaphragm Pump Works
The pump is driven by an AC or DC motor
In front of the motor is a valve assembly containing two to five valve pump chambers. Each valve chamber
Has a diaphragm behind it in the lower pump housing. As the motor shaft turns, an internal cam positioned behind the diaphragms causes the diaphragms to be pushed forward, then back in a continuous sequence creating a suction. As this suction builds, fluid is pulled through the inlet, through the various valve chamber check valves to the outlet
The volume of flow is determined by several factors including: The number and size of the pump chambers, cam offset, operating pressure, fluid viscosity
Housings: | Polypropylene |
Valves: | Viton |
Diaphragm: | Santoprene |
Fasteners: | Stainless Steel |
Motor Shell: | Coated Steel |
STANDARD PUMP CONFIGURATIONS |
Model | Switch | GPM/LPM | PSI/BAR | Max Draw(A) | Valves | Diaphragm | Ports | Voltage | Wire Connections |
SFDP1-015-120-36 | By Pass | 1.5/5.5 | 120/8.3 | 10 | Viton | Santoprene | 3/8"-18 FNPT | 12V | 2-Pin/Leads |
SFDP2-015-120-36 | By Pass | 1.5/5.5 | 120/8.3 | 5 | Viton | Santoprene | 3/8"-18 FNPT | 24V | 2-Pin/Leads |
SFDP1-018-120-36 | By Pass | 1.8/7.0 | 120/8.3 | 12 | Viton | Santoprene | 3/8"-18 FNPT | 12V | 2-Pin/Leads |
SFDP2-018-120-36 | By Pass | 1.8/7.0 | 120/8.3 | 6 | Viton | Santoprene | 3/8"-18 FNPT | 24V | 2-Pin/Leads |
SFDPA1-015-120-36 | By Pass | 1.5/5.5 | 120/8.3 | 0.8 | Viton | Santoprene | 3/8"-18 FNPT | 110V | Leads |
SFDPA2-015-120-36 | By Pass | 1.5/5.5 | 120/8.3 | 0.5 | Viton | Santoprene | 3/8"-18 FNPT | 220V | Leads |
Consult factory for other available models |