10kV XLPE Insulated Overhead Cable

Introduction of 10kV XLPE Insulated Overhead Cable

XLPE insulated or covered overhead cable without or with conductor screen, the phase conductor may be AAC or AAAC or ACSR or Copper.

Operating Characteristics of 10kV XLPE Insulated Overhead Cable

Operating voltage: 10kV;

Max. permissible continuous operating temperature of conductor with XLPE insulation: 90°C;

Max. temperature of conductor during short-circuit (5s max. duration) shall not exceed: 250°C;

The ambient temperature under installation should not be lower than: -20°C;

The bending radius of cable is recommended as following:

Single core cable: not less than 20 times of the diameter of cable;

Multi-core cable: not less than 15 times of the diameter of cable.

Application of 10kV XLPE Insulated Overhead Cable

10kV XLPE insulated overhead cable as a new-type overhead cable is used for overhead electric power transmission and distribution, extensively used in rebuilding of urban and forest region electrified wire netting. It improves the safety and reliance of electrified wire netting.

Manufacturing Standards of 10kV XLPE Insulated Overhead Cable

GB/T 14049-2008, IEC 60502-2

Introduction of our company

Gongyi Shengzhou Metal Products Trading Co., Ltd. is a professional China Wire and Cable Manufacturers, mainly supply Aerial bundled cable, Insulated Overhead Cable, Nylon Sheathed Cable, Aluminium Conductor Steel Reinforced, PVC Flat-Twin Cu Cable, YJV Power Cable, BV Electric Wires, H07V-R Cable, Nylon Jacketed Cable, Buried Cable, House Electric Wire etc. series of wire and cable products, sincerely welcome everyone to visit.

Contact informations

MOBILE: +86.15137196538
Tel: +86.371.60266515
SKYPE: yoyo@cncablewire.com
Whatsapp: +86.15137196538
E-MAIL: yoyo@cncablewire.com