Feature

1.This 400W CO2 power supply is composed of 8pcs high quality transformers. It is mainly used to drive the high-power CO2 folding laser tube which is used in the laser knife mold machine.

2. This AC110/220V CO2 power supply adopts G/P/L/G/IN/5V as control signal output interface.The AC110/220V CO2 power supply adopts aluminum base and upper cover, galvanized sheet housing case.

3. Good compatibility: The 450W CO2 power supply can drive Yongli,Weiju,EFR,SPT and other brands 450-500watt folding 3 cores CO2 laser tube and it also has a strong adaptability and fast response, cutting advantages of good effect.

4. The CO2 power supply for folding laser tube has stable working performance: Each CO2 power supply for folding laser tube has been much more rigorous testing procedures, under full load high temperature (52~55 degrees Celsius) 24 hours of aging, to ensure the stability of each 450W CO2 Laser PSU.

5. Control is simple: This AC110/220V CO2 power supply uses high or low level control, the use of TTL-level control of the laser can start and stop. At the same time it increases the protection switch, testing is through the external water and ventilation on this AC110/220V CO2 power supply.

6. Protection function: This 450W CO2 power supply has open circuit protection: Under the condition of good protective earth, this 450W CO2 power supply can work in open-circuit for a short time, which could avoid the damage to this 450W CO2 power supply

7.Laser power control is simple on this CO2 power supply for folding laser tube, 0-5V analog signal control the laser power can be used, It can also use the PWM (pulse width modulation) signal to control output laser power.

Specification